Good Quality Bare Stranded Copper Wire - Micro Coaxial Cable Inner Conductor Copper Clad Aluminum Magnesium Wire Used for High-Frequency Signal Transmission – Shenzhou Detail:
Product Detail
To achieve better tensile strength, using aluminum magnesium alloy rod as the core wire, then cladding copper layer on the surface, after drawing several times, then copper clad aluminum magnesium wire is made.
Advantages: Same as CCA Wire, it has low density, easy to solder and high strength.
Disadvantages: As the conductor contains magnesium, the resistivity compared with pure CCA wire is higher. It is not conductive to make conductor for transporting current.
Product Parameter
|
Product name? |
CCAM WIRE |
|
Diameters available??[mm] Min – Max |
0.05mm-2.00mm |
|
Density??[g/cm3] Nom |
2.95-4.00 |
|
Conductivity?[S/m * 106] |
31-36 |
|
IACS??[%] Nom |
58-65 |
|
Temperature-Coefficient [10-6/K] Min – Max |
3700 – 4200 |
|
Elongation?(1)[%] Nom |
17 |
|
Tensile strength?(1)[N/mm2] Nom |
170 |
|
Outer metal by volume[%] Nom |
3-22% |
|
Outer metal by weight[%] Nom |
10-52 |
|
Weldability/Solderability[--] |
++/++ |
|
Properties |
CCAM?combines the advantages of Aluminum and Copper. Lower density allows weight reduction, elevated conductivity and tensile strength compared to CCA, good weldability and solderability, recommended for very fine sizes down to 0.05mm |
|
Application |
CATV coaxial cable, large capacity communication network signal electric LAN, control signal cable, cable shielding line, metal hose etc. Aspects. |
IEC 60317(GB/T6109)
The Tech & Specification parameters of our company’s wires are in international unit system, with the unit of millimeter (mm).?If use American Wire Gauge (AWG) and British Standard Wire Gauge (SWG) , the following table is a comparison table for your reference.
The most special dimension can be customized as per the requirements of customers.
Comparison of Different Metal Conductors’s Tech& Specification
|
METAL |
Copper |
Aluminium?Al?99.5 |
CCA10% |
CCA15% |
CCA20% |
CCAM |
TINNED WIRE |
|
Diameters??available |
0.04mm -2.50mm |
0.10mm -5.50mm |
0.10mm -5.50mm |
0.10mm -5.50mm |
0.10mm -5.50mm |
0.05mm-2.00mm |
0.04mm -2.50mm |
|
Density??[g/cm3] Nom |
8.93 |
2.70 |
3.30 |
3.63 |
3.96 |
2.95-4.00 |
8.93 |
|
Conductivity[S/m * 106] |
58.5 |
35.85 |
36.46 |
37.37 |
39.64 |
31-36 |
58.5 |
|
IACS[%] Nom |
100 |
62 |
62 |
65 |
69 |
58-65 |
100 |
|
Temperature-Coefficient[10-6/K] Min – Max |
3800 – 4100 |
3800 – 4200 |
3700 – 4200 |
3700 – 4100 |
3700 – 4100 |
3700 – 4200 |
3800 – 4100 |
|
Elongation?(1)[%] Nom |
25 |
16 |
14 |
16 |
18 |
17 |
20 |
|
Tensile strength?(1)[N/mm2] Nom |
260 |
120 |
140 |
150 |
160 |
170 |
270 |
|
Outer metal by volume[%] Nom |
- |
- |
8-12 |
13-17 |
18-22 |
3-22% |
- |
|
Outer metal by weight[%] Nom |
- |
- |
28-32 |
36-40 |
47-52 |
10-52 |
- |
|
Weldability/Solderability[--] |
++/++ |
+/– |
++/++ |
++/++ |
++/++ |
++/++ |
+++/+++ |
|
Properties |
Very high conductivity, good tensile strength, high elongation, excellent windability, good weldability and solderability |
Very low density allows high weight reduction, fast heat dissipation, low conductivity |
CCA combines the advantages of Aluminum and Copper. Low density allows weight reduction, elevated conductivity and tensile strength compared to Aluminum, good weldability and solderability, recommended for diameter 0.10mm and above |
CCA combines the advantages of Aluminum and Copper. Lower density allows weight reduction, elevated conductivity and tensile strength compared to Aluminum, good weldability and solderability, recommended for very fine sizes down to 0.10mm |
CCA combines the advantages of Aluminum and Copper. Lower density allows weight reduction, elevated conductivity and tensile strength compared to Aluminum, good weldability and solderability, recommended for very fine sizes down to 0.10mm |
CCAM?combines the advantages of Aluminum and Copper. Lower density allows weight reduction, elevated conductivity and tensile strength compared to CCA, good weldability and solderability, recommended for very fine sizes down to 0.05mm |
Very high conductivity, good tensile strength, high elongation, excellent windability, good weldability and solderability |
|
Application |
General coil winding for electrical application, HF litz wire. For use in industrial, automotive, appliance, consumer electronics |
Different electrical application with low weight requirement, HF litz wire. For use in industrial, automotive, appliance, consumer electronics |
Loudspeaker, headphone and earphone, HDD, induction heating with the need of good termination |
Loudspeaker, headphone and earphone, HDD, induction heating with the need of good termination, HF litz wire |
Loudspeaker, headphone and earphone, HDD, induction heating with the need of good termination, HF litz wire |
Electrical wire and cable, HF litz wire |
Electrical wire and cable, HF litz wire |
Product detail pictures:
Related Product Guide:
We are commitment to offer you the aggressive price tag ,exceptional products and solutions high-quality, as well as fast delivery for Good Quality Bare Stranded Copper Wire - Micro Coaxial Cable Inner Conductor Copper Clad Aluminum Magnesium Wire Used for High-Frequency Signal Transmission – Shenzhou , The product will supply to all over the world, such as: Nairobi, Turkey, Montreal, Faced with the vitality of the global wave of economic integration, we've been confident with our high-quality items and sincerely service to all our customers and wish we can cooperate with you to create a brilliant future.
By Natividad from Peru - 2017.09.29 11:19
The sales person is professional and responsible, warm and polite, we had a pleasant conversation and no language barriers on communication.
By Miranda from Amsterdam - 2017.01.28 18:53
Products categories
-
High reputation Multi Conductor Control Cable -...
-
Big discounting 2 Wire Twisted Pair - High qua...
-
Competitive Price for Copper Plated Aluminum Wi...
-
Professional Design Yellow Electrical Wire - H...
-
PriceList for 12 Conductor 16 Awg Cable - High...
-
Reasonable price 3 Gang Light Switch Wiring - ...